01177nas a2200145 4500008004100000050001500041245011000056210006900166260003000235490001600265520062700281100002200908700002400930856007700954 1996 eng d aLBNL-3924800aSolar Heat Gain Coefficient of Complex Fenestrations with a Venetian Blind for Differing Slat Tilt Angles0 aSolar Heat Gain Coefficient of Complex Fenestrations with a Vene aPhiladelphia, PAc01/19970 v103, Part 13 a

Measured bidirectional transmittances and reflectances of a buff-colored venetian blind together with a layer calculation scheme developed in previous publications are utilized to produce directional-hemispherical properties for the venetian blind layer and solar heat gain coefficients for the blind in combination with clear double glazing. Results are presented for three blind slat tilt angles and for the blind mounted either interior to the double glazing or between the glass panes. Implications of the results for solar heat gain calculations are discussed in the context of sun positions for St. Louis, MO.

1 aKlems, Joseph, H.1 aWarner, Jeffrey, L. uhttps://facades.lbl.gov/publications/solar-heat-gain-coefficient-complex01580nas a2200157 4500008004100000050001400041245008700055210006900142260002500211490001600236520102900252100002201281700002401303700002001327856007501347 1995 eng d aLBL-3703700aA Comparison Between Calculated and Measured SHGC For Complex Fenestration Systems0 aComparison Between Calculated and Measured SHGC For Complex Fene aAtlanta, GAc02/19960 v102, Part 13 a

Calorimetric measurements of the dynamic net heat flow through a complex fenestration system consisting of a buff venetian blind inside clear double glazing are used to derive the direction-dependent beam SHGC of the fenestration. These measurements are compared with calculations according to a proposed general method for deriving complex fenestration system SHGCs from bidirectional layer optical properties and generic calorimetric properties. Previously published optical measurements of the same venetian blind and generic inward-flowing fraction measurements are used in the calculation. The authors find satisfactory agreement between the SHGC measurements and the calculation.

Significant dependence on incident angle was found in the measured SHGCs. Profile angle was not found to be a useful variable in characterizing the system performance. The predicted SHGC was found to be inherently dependent on two angles, although only the incident angle variations were observable under the test conditions.

1 aKlems, Joseph, H.1 aWarner, Jeffrey, L.1 aKelley, Guy, O. uhttps://facades.lbl.gov/publications/comparison-between-calculated-and01775nas a2200133 4500008004100000050001400041245007900055210006900134490001600203520130100219100002201520700002401542856007501566 1995 eng d aLBL-3624300aMeasurement of Bidirectional Optical Properties of Complex Shading Devices0 aMeasurement of Bidirectional Optical Properties of Complex Shadi0 v101, Part 13 a

A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bidirectional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient.

This paper describes the method of measuring the spatially averaged bidirectional optical properties using an automated, large-sample gonio-radiometer/photometer, termed a Scanning Radiometer. Property measurements are presented for one of the most optically complex systems in common use, a venetian blind. These measurements will form the basis for optical system calculations used to test the method of determining performance.

1 aKlems, Joseph, H.1 aWarner, Jeffrey, L. uhttps://facades.lbl.gov/publications/measurement-bidirectional-optical01745nas a2200133 4500008004100000050001400041245008400055210006900139260003400208520124400242100002201486700002401508856007901532 1992 eng d aLBL-3219800aA New Method for Predicting the Solar Heat Gain of Complex Fenestration Systems0 aNew Method for Predicting the Solar Heat Gain of Complex Fenestr aClearwater Beach, FLc12/19923 a

A new method of predicting the solar heat gain through complex fenestration systems involving nonspecular layers such as shades or blinds has been examined in a project jointly sponsored by ASHRAE and DOE. In this method, a scanning radiometer is used to measure the bi-directional radiative transmittance and reflectance of each layer of a fenestration system. The properties of systems containing these layers are then built up computationally from the measured layer properties using a transmission/multiple-reflection calculation. The calculation produces the total directional-hemispherical transmittance of the fenestration system and the layer-by-layer absorptances. These properties are in turn combined with layer-specific measurements of the inward-flowing fractions of absorbed solar energy to produce the overall solar heat gain coefficient.

The method has been applied to one of the most optically complex systems in common use, a venetian blind in combination with multiple glazings. A comparison between the scanner-based calculation method and direct system calorimetric measurements made on the LBL MoWiTT facility showed good agreement, and is a significant validation of the method accuracy and feasibility.

1 aKlems, Joseph, H.1 aWarner, Jeffrey, L. uhttps://facades.lbl.gov/publications/new-method-predicting-solar-heat-gain