02740nas a2200181 4500008004100000050001900041245006200060210006200122260003100184520212100215100003402336700002502370700002102395700002102416700002702437700002302464856007102487 1994 eng d aLBL-35382 Rev.00aSimulating the Energy Performance of Holographic Glazings0 aSimulating the Energy Performance of Holographic Glazings aFreiburg, Germanyc04/19943 a

The light diffraction properties of holographic diffractive structures present an opportunity to improve the daylight performance in side-lit office spaces by redirecting and reflecting sunlight off the ceiling, providing adequate daylight illumination up to 30 ft (9.14 m) from the window wall. Prior studies of prototypical holographic glazings, installed above conventional view windows, have shown increased daylight levels over a deeper perimeter area than clear glass, for selected sun positions. In this study, we report on the simulation of the energy performance of prototypical holographic glazings assuming a commercial office building in the inland Los Angeles climate.

The simulation of the energy performance involved determination of both luminous and thermal performance. Since the optical complexity of holographic glazings prevented the use of conventional algorithms for the simulation of their luminous performance, we used a newly developed method that combines experimentally determined directional workplane illuminance coefficients with computer-based analytical routines to determine a comprehensive set of daylight factors for many sun positions. These daylight factors were then used within the DOE-2.1D energy simulation program to determine hourly daylight and energy performance over the course of an entire year for four window orientations.

Since the prototypical holographic diffractive structures considered in this study were applied on single pane clear glass, we also simulated the performance of hypothetical glazings, assuming the daylight performance of the prototype holographic glazings and the thermal performance of double-pane and low-e glazings. The results of our analyses show that these prototypical holographic glazings did not save significant electric energy or reduce peak electricity demand compared to conventional energy-efficient window systems in inland Los Angeles office buildings, mainly because of their low diffraction efficiency. Finally, we address various design and implementation issues towards potential performance improvement.

1 aPapamichael, Konstantinos, M.1 aBeltran, Liliana, O.1 aFurler, Reto, A.1 aLee, Eleanor, S.1 aSelkowitz, Stephen, E.1 aRubin, Michael, D. uhttps://facades.lbl.gov/publications/simulating-energy-performance