02011nas a2200133   4500008004100000050001400041245011500055210006900170260002400239520148000263100003401743700002501777856007501802       1993                        eng d  aLBL-3394500aSimulating the Daylight Performance of Fenestration Systems and Spaces of Arbitrary Complexity: The IDC Method0 aSimulating the Daylight Performance of Fenestration Systems and   aAdelaide, Australia3 a<p>A new method to simulate the daylight performance of fenestration systems and spaces is presented. This new method, named IDC (Integration of Directional Coefficients), allows the simulation of the daylight performance of fenestration systems and spaces of arbitrary complexity, under any sun, sky and ground conditions. The IDC method is based on the combination of scale model photometry and computer-based simulation. Physical scale models are used to experimentally determine a comprehensive set of directional illuminance coefficients at reference points of interest, which are then used in analytical, computer-based routines, to determine daylight factors or actual daylight illuminance values under any sun, sky and ground conditions.</p><p>The main advantage of the IDC method is its applicability to any optically complex environment. Moreover, the computer-based analytical routines are fast enough to allow for hourly simulation of the daylight performance over the course of an entire year. However, the method requires appropriate experimental facilities for the determination of the Directional Coefficients. The IDC method has been implemented and used successfully in inter-validation procedures with various daylight simulation computer programs. Currently, it is used to simulate the daylight performance of fenestration systems that incorporate optically complex components, such as Venetian blinds, optically treated light shelves and light pipes.</p>1 aPapamichael, Konstantinos, M.1 aBeltran, Liliana, O.  uhttps://facades.lbl.gov/publications/simulating-daylight-performance-0